Parametros basicos:
Nombre de la marca：SÍ MISMO
Lugar de origen：fujián, Porcelana
Número de modelo：500X-16Q
Conexión：Brida
Presión de prueba de sellado：16 bar
Talla disponible：DN40--DN500
Cuerpo material：Ductile QT450
Presión laboral：1-1.6MPa
Temperatura aplicable：0℃-- 80℃
Material：Hierro dúctil
Descripción del Producto:
The valve consists of a main valve and an external control pilot valve. It is mainly installed in the bypass of the protected water supply system of the building to ensure the pressure in the water supply area upstream of the main valve. When the pressure in the water supply pipe exceeds the set pressure of the pressure relief valve, the pressure relief valve is opened to prevent the pipeline and equipment from being damaged due to overpressure. daño. This valve is mainly used for the pressure relief of the fire test circulation system of high-rise buildings, and is an upgraded product of the spring-type safety valve. Installation requirements
A filter must be installed before the pressure relief/sustaining valve. When adjusting, the screw on the pilot valve should be withdrawn, start the water pump to let the water drain from the pressure relief valve, and gradually screw it into the adjusting screw to gradually increase the pressure until the pressure to be set is reached. Tighten the lock nut after setting.
When the pressure in the water supply pipe exceeds the set pressure of the pressure relief valve, the pressure relief valve will be opened to prevent the pipeline and equipment from beingdamaged due to overpressure. In order to prevent the system from being dangerous due to highwater pressure.
Características:
- Extremo de brida :Estándar ANSI150LB/GB/Estándar BS;
- Material de vapor :2CR13 /Acero inoxidable;
- Material del capó :Hierro dúctil ,QT450;
- Cuerpo material :Hierro dúctil ,QT450;
- Material del sello :Hierro dúctil ,QT450,NBR
- Acabado de superficies :Epoxi rojo o azul
- Presión laboral ：10/16 Bar
Parámetro técnico:
Información adicional
| Nombre de la marca : | SÍ MISMO |
|---|---|
| Talla disponible: | DN40–DN500 |
| Presión laboral: | 1-1.6MPa |
| Lugar de origen: | fujián, Porcelana |
