Joint élastique de vanne à filetage–Z15X-16Q

Paramètres de base:

Marque：LUI-MÊME
Lieu d'origine：Fujian, Chine
Numéro de modèle：Z45T-16Q
Connexion：Bride
Sealing testing pressure：24 bar
Available Size：DN15 - DN100
Matériau du corps：Ductile QT450
Pression de travail：10-16 Bar
Applicable temperature：0-80°C
Installation：Vertically or horizontally
Matériel：Fonte Ductile

Description du produit:

Soft-sealing gate valve is water the introduction of high-tech products, using synthetic rubber deformation compensation effect overall package to achieve good sealing effect overcomes the general gate seal bad leakage and rusty phenomenon using the same as the pipe at the bottom of the flat seat design.do not produce sundry sedimentation. small flow resistance coefficient.smooth chancels.Non-toxic epoxy resin coat is applied inside and outside the valve body to prevent corrosion and rust. It can not only be used for domestic water but also for sewage treatment system.

Caractéristiques:

• Flange End :ANSI150LB/GB Standard /BS Standard;
• Steam Material :2CR13 /Stainless Steel;
• Bonnet Material :Fonte Ductile ,QT450;
• Matériau du corps :Fonte Ductile ,QT450;
• Seal Material :Fonte Ductile ,QT450,NBR
• Surface Finishing :Epoxy Red or Blue
• Pression de service ：10/16 Bar

Paramètre technique:

DN	G	L	H		B	UN
15	1/2	65	84	60	30	15
20	3/4	70	87	60	39	15
25	1	80	106	70	42	17
32	1 1/4	93	124	75	52	20
40	1 1/2	98	160	88	57	20
50	2	110	170	88	72	22
65	2.5	130	203	125	88	28
80	3	142	232	135	105	28
100	4	167	272	148	128	32