Guarnizione elastica della valvola a saracinesca filettata–Z15X-16Q

Parametri di base:

Marchio：SI
Luogo d'origine：Fujian, Cina
Numero di modello：Z45T-16Q
Connessione：Flangia
Sealing testing pressure：24 sbarra
Available Size：DN15 - DN100
Materiale corporeo：Ductile QT450
Pressione lavorativa：10-16 Sbarra
Applicable temperature：0-80°C
Installazione：Vertically or horizontally
Materiale：Ferro duttile

Descrizione del prodotto:

Soft-sealing gate valve is water the introduction of high-tech products, using synthetic rubber deformation compensation effect overall package to achieve good sealing effect overcomes the general gate seal bad leakage and rusty phenomenon using the same as the pipe at the bottom of the flat seat design.do not produce sundry sedimentation. small flow resistance coefficient.smooth chancels.Non-toxic epoxy resin coat is applied inside and outside the valve body to prevent corrosion and rust. It can not only be used for domestic water but also for sewage treatment system.

Caratteristiche:

• Flange End :ANSI150LB/GB Standard /BS Standard;
• Steam Material :2CR13 /Stainless Steel;
• Bonnet Material :Ferro duttile ,QT450;
• Materiale corporeo :Ferro duttile ,QT450;
• Seal Material :Ferro duttile ,QT450,NBR
• Surface Finishing :Epoxy Red or Blue
• Pressione lavorativa ：10/16 Sbarra

Parametro tecnico:

DN	G	L	H		B	UN
15	1/2	65	84	60	30	15
20	3/4	70	87	60	39	15
25	1	80	106	70	42	17
32	1 1/4	93	124	75	52	20
40	1 1/2	98	160	88	57	20
50	2	110	170	88	72	22
65	2.5	130	203	125	88	28
80	3	142	232	135	105	28
100	4	167	272	148	128	32