Basic parameters:
Brand Name:SICH
Place of Origin:Fujian, China
Model Number:HQ41X-16Q
Connection:Flange
Sealing testing pressure:24 bar
Available Size:DN50 - DN600
Working pressure:1.0-1.6Mpa
Applicable temperature:0-80°C
Installation:Vertically or horizontally
Material:Ductile Cast Iron
Seal Material:Ductile Iron QT450 NBR
Bonnet Materia:Ductile Iron QT450
Steam Material:2CR13 Stainless Steel
Flange End:ANSI150LB GB Standard BS Standard
Product Description:
SICH flange ball valve check valve sliding path roller type check valve uses the rubber covered roller as the disc,when,under the action of the medium, can roll up and down a long with the integral sliding path inside the valve so as to open or close it.It features by good tightness ,silient close and no production of water hammer .The body is full water-flow path design,big flow ,small resistance and the water head loss is smaller that of the swing type by 50%.It is mountable vertically or horizontally and can used for cold-water,hot-water,industrial and living sludge pipe networks,especially suitable for the submersible sludge pump .The medium temperature:0-80ºC
Features:
- Flange End :ANSI150LB/GB Standard /BS Standard;
- Steam Material :2CR13 /Stainless Steel;
- Bonnet Material :Ductile Iron ,QT450;
- Body Material :Ductile Iron ,QT450;
- Seal Material :Ductile Iron ,QT450,NBR
- Surface Finishing :Epoxy Red or Blue
- Working Pressure :10/16 Bar
Technical parameter:
Additional information
Brand Name : | SICH |
---|---|
Available Size: | DN50 – DN600 |
Working pressure: | 1.0-1.6Mpa |
Place of Origin: | Fujian, China |